Minimum Order Quantity: 50 Kilogram
|Color||St hazy liquid|
|Mixing ratio||1 pbv|
|Total solid%||99 +-1%|
LEADERS IN BONDING TECHNOLOGIES
GENERAL PURPOSE EPOXY ADHESIVE
General purpose Epoxy resin base Adhesive which gives a joint of unmatched strength. Both are available in fluid easy to mix consistency ready for immediate application. A versatile adhesive, suitable for Bonding, Pouring, Sealing, Plumbing, Potting, Encapsulating, Tooling, Coating, etc. for industrial and household applications such as Textile, Foundries, Electrical, electronics, Construction, Engineering, Auto and Marine. It can bonding anything to anything ranging from wood, rubber,
glass, china, fiber, leather, paper, stone, ceramics, metal (ferrous & non ferrous), ivory, granite, asbestos, cardboard, porcelain, and most plastic, except some plastics and Teflon. The success of the Epoxy Adhesive is due to their low shrinkage, high bonding strength, good light stability, good mechanic ability resistance to heat , humidity and chemicals.
MIXING RATIO AND POT LIFE:-
Part-A and Part-B should be mixed in the ratio of 10:08 by weight or ( 1:1 by volume) when the lower proportion of Part-B is used, the chemicals resistance is higher but the bond slightly lower. The higher proportion of Part-B corresponds to a mixing ratio 1:1 by volume and gives maximum bond strength.
The two component must be mixed before use. The pot life depends on room temperature, temperature of the mix. The higher the temp. and larger the mix the shorter will be its pot life. Good compromise can be arrived at by adjusting the temperature and amount of the mix. So that the pot life is enough for the application. Generally 50 grams each of the above when mixed, gives pot life of 30 to 60 minutes approximately at room temperature.
Quantity of the mix should be as low as possible to increase the usable life of the mix system. Mixed quantity of above 100 grams will such shorter pot life.
View Complete details