MR Bond Polychem

• Timely executing
• Cost effective
• Rendered by professional workers

Additional Information:

• Item Code: EP-07
• Port of Dispatch: Pipavav or Mumbai
• Production Capacity: 10 Tons
• Delivery Time: 15 Days After PO
• Packaging Details: 50 Kg. & 200 Kg.

• Highly effective coating
• Timely executing
• Reliable

CRYSTAL CLEAR POLYURETHANE – EPOXY based polymer adduct of gloss and adhesion improver are suitable for 3D floorings can apply on concrete, Stone, wood and ceramics and laminated sheets specially developed coating an for casting are transparent and colored application.

WHERE TO USE:-

For 3D floor coating, Jewelry Meena, Gift articles, God idols, Key chain, wood, Marble, natural stone, concrete, ceramics, glass, ornamental metal, Appliances, Machineries, wall, Electric & electronics instruments, LED Encapsulating, Paver block and Tiles, Table top, Specially formulated for Inlay in stone and wood, etc. 

• Superior quality
• Free from harmful chemicals
• Precise processing

EPOXY based polymer of gloss and adhesion improver are suitable for wood and ceramic laminating and specially formulated for Jewellery , stone and wood coating and for colored MEENA application. And specially for stone / wood coating and filling crack and inlay applications. Ideally suitable for this application, provide clear, blush free, glossy, solvent free, high build coatings.

METHOD OF USE:- FOR SMALL ARTICALS (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. (2) Heat the substrate / item that should be treated (3) Mix the polymer in proper ratio and remove bubbles by applying heat ( 40 oC) for some time and vacuum the bubbled Air. (4) Apply the mixed polymer clear / colored ( Add small drop quantity for light color and add more drop quantity for dark color in to the clear polymer. (5) Stoving should be done in closed oven for hard and glossy look. (6) Maintain temperature 40-60 oC for better results. Mix equal volumes of Part A and Part B. The two parts must be thoroughly mixed together to obtain a properly cured coating. The pot life of this system is about 20 -30 minutes. Coatings of this type should be applied to horizontal surfaces. The object to be coated should be elevated from the work surface by a pedestal smaller in diameter than the object so the coating can flow freely off the edges. As soon as the coating is mixed, it should be poured over the object and, if necessary, spread with a brush to ensure complete coverage. The bubbles created during mixing are typically broken by brushing the coating’s surface or by blowing on it using forced hot air. This high-gloss coating of 10 to 20 mils thickness will dry in about 7 hours at room temperature (~25oC) and will achieve its full hardness in 2 to 3 days. Color and gloss (i.e., lack of blush) are outstanding. Where a low HDT can be a problem (on tabletops, for example) a formulation containing less Note that clear coatings of this type should not be used on objects exposed to direct sunlight. General-purpose epoxy resins will yellow over time under such conditions.

• Create uniqueness of shed
• High pictorial strength
• Dry in normal temperature

BOND & BOND

(Epoxy Resin-ER-200 & Hardener-PR-140)/

Super power room temperature curing modified system are a specially developed from Besphenol and Epichlorohydrin for high build coating, Bonding, adhesive grouting and mortaring application. The hardener for curing of epoxies are used like polyamide, polyamines and polyamidoamines for different application and required properties and curing time.

A versatile system are success of their following properties:-

*Excellent adhesion to many materials * Excellent resistance to chemicals, heat and moisture

* negligible shrinkage * good mechanical and electrical properties.

APPLICATIONS:-

1.Protective coatings:- corrosion protection of metal and concrete. 2.  Industrial Heavy duty Floorings:- For requirement of highly impact resistance, chemical resistance and maintenance  and dust free properties. 3. Grouting for Machine Foundation, Bridges, Dam:- For the strengthening and leakage stopping etc. 4.  Sealing of cracks and bonding of old and new concrete and for waterproofing: - Sealing of crack by pressure grouting for waterproofing and improve the strength of structure. Bond for old and new concrete surface, etc. 

Specification:

WHERE TO USE:- Use at Bridge, Buildings, Dam, Canal, Tunnel, Chemical factories, steel structures, Petrochemical plant, Oil Tank, Power plants, Work shops, Effluent treatment plants, Sewerage plants, , Godowns, Pipe lines, Terraces, Electric & electronics instruments

• Perfect quality material used
• Flexible
• Rendered by experts

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit)
• Port of Dispatch: Nhavashiva, Pipavav
• Production Capacity: 10000 kg
• Delivery Time: 15 days
• Packaging Details: 20 Kg

• Weather resistance
• Purity
• Long shelf life