Gota - 382481, Ahmedabad, Gujarat
GST No. 24ABBFM1062G1ZR
Call 07942544875 85% Response Rate
Minimum Order Quantity: 100 Kilogram
Product Brochure
Brand | BOND |
Packaging Size | 20 |
Coverage | depend on coat |
Type | Acrylic |
Color | White |
Form | Liquid |
Packaging Type | bucket |
Bond & Bond MB-100
Transparent Water repellent system
Water leakages is headache. Due to leakage the building and its structure are damaged and became week due to corrosion also. Many systems are available in market but our practical experience nothing it may 100% successful and economic.
Conventional Waterproofing System and Present problems
_ Available W.P. system are seal the pores, but stop breathing.
_ may be black color and heavy weight
_May be UV absorber and heat increasing and passing through ceiling.
_ Many cases we cant use terrace, due to thin coating and black color.
_Not fungus and moss preventive.
_Application is not easy.
_Product does not perform up to the completion of warranty period.
_ Expensive, time consuming & laborious Job.
_Paint failures, Deterioration on the wall (Black spots / patches) because of formation of moss, fungus and algee.
MB-100 WATER REPPALLENT SYSTEMS
_ Stop Leakage & create breathable hydrophobic zone.
_ Weightless, colorless, Easy to apply, UV light resistance,
_No moss, fungus, algee accumulations., Ready to use.
_We can use terrace due to deep penetrations.
_Stop leakage cracks up to 1MM width in wall ( vertical surface).
_ Highly cost effective,will not allow water, dust, smoke, fungi,
Additional Information:
View Complete details
Minimum Order Quantity: 50 Square Feet
Product Brochure
Additional Information:
View Complete details
Minimum Order Quantity: 20 Kilogram
Product Brochure
Urethane-Epoxy coating is formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On Terrace, wall, in Tank, Swimming pool, Sump, Filter plant, Basement, at Bridge, Buildings, Dam, Canal, Tunnel, Marine structures, Ware hoses, Chemical factories, Petrochemical plant, Oil Tank, Power plants, Work shops, Effluent treatment plants, Sewerage plants, , Godowns, Pipe lines, Terraces, Electric & electronics instruments
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.(2)For waterproofing Visible Crack should be open & fill by paste of WP-103(or other wp system) + Filler/ cement (3) invisible /hair line crack should be fill by CAD-903(Take 1 Kg CAD-903 + 9 Kg water & fill like pond, allow 24 hrs and clean the surface. (4) Apply first primer thin coat on clean & dry surface (5) Apply second coat on first coat (6) Lay down fiber net wherever required for better result.
BOND | WP-101 | WP-102 | WP-103 | WP-103 (M) | WP-104 | LACR-04 |
TYPE | Acrylic Copolymer | ELASTOMERIC WATERPROOFING POWDER | Styrene acrylic copolymer | Modified Styrene acrylic copolymer | Tar modified Styrene acrylic Copolymer | Acrylic water Based clear |
Color | Milky White Translucent | White / Grey Powder | Milky White Translucent | Milky White Translucent | Black / Brown | Water clear Lacquered finish |
Additional Information:
View Complete details
Product Brochure
Bond & Bond MB-100
Transparent Water repellent system
Water leakages is headache. Due to leakage the building and its structure are damaged and became week due to corrosion also. Many systems are available in market but our practical experience nothing it may 100% successful and economic.
Conventional Waterproofing System and Present problems
_ Available W.P. system are seal the pores, but stop breathing.
_ may be black color and heavy weight
_May be UV absorber and heat increasing and passing through ceiling.
_ Many cases we cant use terrace, due to thin coating and black color.
_Not fungus and moss preventive.
_Application is not easy.
_Product does not perform up to the completion of warranty period.
_ Expensive, time consuming & laborious Job.
_Paint failures, Deterioration on the wall (Black spots / patches) because of formation of moss, fungus and algee.
View Complete details
Product Brochure
BOND & BOND –WP-101 / 102/ 103/ 104
A DO-IT YOURSELF MULTI-PURPOSE WATERPROOFING SYSTEM
STYRENE ACRYLIC COPOLYMER SYSTEM FOR WATERPROOFING
Urethane-Epoxy coating is formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On Terrace, wall, in Tank, Swimming pool, Sump, Filter plant, Basement, at Bridge, Buildings, Dam, Canal, Tunnel, Marine structures, Ware hoses, Chemical factories, Petrochemical plant, Oil Tank, Power plants, Work shops, Effluent treatment plants, Sewerage plants, , Godowns, Pipe lines, Terraces, Electric & electronics instruments
View Complete details
Minimum Order Quantity: 20 Kilogram
Product Brochure
Brand | BOND |
Application Method | Roller, Spray, Brush |
Classification | Epoxy Antistatic Floor, Self Levelling, Gravelled Epoxy Coating, Mortar Epoxy Coating |
Types | Solvent Based, Water Based |
Packing Size | 20 L |
Wide range of high performance Epoxy Floor Coatings used in warehouses, workshops, food processing and beverage manufacture, heavy industrial sites, aircraft hangers, shops, restaurants and offices, that delivers quality and performance. These products can be applied as a simple coating to concrete to reduce the possibility of dusting, as well as to create an impervious working floor.
Additional Information:
View Complete details
Product Brochure
Urethane-Epoxy coating is formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On Terrace, wall, in Tank, Swimming pool, Sump, Filter plant, Basement, at Bridge, Buildings, Dam, Canal, Tunnel, Marine structures, Ware hoses, Chemical factories, Petrochemical plant, Oil Tank, Power plants, Work shops, Effluent treatment plants, Sewerage plants, , Godowns, Pipe lines, Terraces, Electric & electronics instruments
Additional Information:
View Complete details
Minimum Order Quantity: 50 Square Feet
Product Brochure
Build Up Area / Size | Customized |
Site Location | Anywhere |
Additional Information:
View Complete details
Minimum Order Quantity: 50 square meter
Product Brochure
Additional Information:
View Complete details
Product Brochure
Urethane-Epoxy coating is formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On Terrace, wall, in Tank, Swimming pool, Sump, Filter plant, Basement, at Bridge, Buildings, Dam, Canal, Tunnel, Marine structures, Ware hoses, Chemical factories, Petrochemical plant, Oil Tank, Power plants, Work shops, Effluent treatment plants, Sewerage plants, , Godowns, Pipe lines, Terraces, Electric & electronics instruments
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kilogram
Product Brochure
Additional Information:
View Complete details
Minimum Order Quantity: 50 Square Feet
Product Brochure
Additional Information:
View Complete details
Minimum Order Quantity: 50 square meter
Product Brochure
Urethane-Epoxy coating is formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On Terrace, wall, in Tank, Swimming pool, Sump, Filter plant, Basement, at Bridge, Buildings, Dam, Canal, Tunnel, Marine structures, Ware hoses, Chemical factories, Petrochemical plant, Oil Tank, Power plants, Work shops, Effluent treatment plants, Sewerage plants, , Godowns, Pipe lines, Terraces, Electric & electronics instruments
Additional Information:
View Complete details
Minimum Order Quantity: 25 Kilogram
Product Brochure
Brand | Mr. Bond Polychem |
WP-102 is a polymer modified waterproofing powder are unique formulations suitable for waterproofing coating
applications. It gives highly flexible waterproofing coatings and water vapor permeability.
PROPERTIES:-
1. Easy to Apply and self curing systems.
2. Prevent Efflorescence
3. Good adhesion to the plaster, concrete and tiles surfaces.
4. Good water vapor permeability (Gives breathability)
5. Having crack bridging properties.
6. Excellent abrasion and weather resistance
7. Resist hydrostatic pressure.
8. Environment friendly
9. Negligible shrinkage
WHERE TO USE;-
For waterproofing at Water tank, Terrace, Sump, Swimming pool, Wall (Internal & External) , Bathrooms, Basements, Garden walls, Apply by brush.
SURFACEPREPARATION: Surface must be clean, dry, sound, firm and free from oil, grease and other contaminations which will impair adhesion.
mixing ratio
| wp-102 powder | water | cement (white/ grey) | sand |
for coating/ priming | 1 parts | 1 parts |
| -- |
for putty | 1 parts | ½ parts | 1-3 parts | -- |
for plastering mortar | 3-4 kg. | required | 1 bag (50 kg) | required |
for screeding | 1 parts | 7 parts | 1 parts | 3 parts |
laying tiles | 1parts | 3 parts | 1parts | required |
Additional Information:
View Complete details
Minimum Order Quantity: 50 sq ft
Product Brochure
Bond & bond –wp-101 / 102/ 103/ 104
Urethane-Epoxy coating is formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On Terrace, wall, in Tank, Swimming pool, Sump, Filter plant, Basement, at Bridge, Buildings, Dam, Canal, Tunnel, Marine structures, Ware hoses, Chemical factories, Petrochemical plant, Oil Tank, Power plants, Work shops, Effluent treatment plants, Sewerage plants, , Godowns, Pipe lines, Terraces, Electric & electronics instruments
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.(2)For waterproofing Visible Crack should be open & fill by paste of WP-103(or other wp system) + Filler/ cement (3) invisible /hair line crack should be fill by CAD-903(Take 1 Kg CAD-903 + 9 Kg water & fill like pond, allow 24 hrs and clean the surface. (4) Apply first primer thin coat on clean & dry surface (5) Apply second coat on first coat (6) Lay down fiber net wherever required for better result.
BOND | WP-101 | WP-102 | WP-103 | WP-103 (M) | WP-104 | LACR-04 |
TYPE | Acrylic Copolymer | ELASTOMERIC WATERPROOFING POWDER | Styrene acrylic copolymer | Modified Styrene acrylic copolymer | Tar modified Styrene acrylic Copolymer | Acrylic water Based clear |
Color | Milky White Translucent | White / Grey Powder | Milky White Translucent | Milky White Translucent | Black / Brown | Water clear Lacquered finish |
FINISH | Matt | Matt | Matt | Matt | Matt | Glossy |
SOLID % BY VOLUME | 28+-2% | 100% | 54 +-2% | 44+- 2% | 45% +- 2% | 40% +-2% |
Additional Information:
View Complete details
Minimum Order Quantity: 50 Square Meter
Product Brochure
Additional Information:
View Complete details
Product Brochure
Brand | BOND |
Additional Information:
View Complete details
Product Brochure
Brand | BOND |
Additional Information:
View Complete details
Minimum Order Quantity: 50 Square Feet
Product Brochure
Additional Information:
View Complete details