MR Bond Polychem
Ahmedabad, Gujarat
GST No. 24ABBFM1062G1ZR
Call 07942544875 86% Response Rate
Send Enquiry
Lacquers Products
Surface Coating Materials
Minimum Order Quantity: 10000 Kg
Product Brochure
| Packaging Size | 50 liter |
| Type | Acrylic |
| Coverage | 150 sft |
| Usage/Application | Concrete |
| Brand | BOND |
| Packaging Type | 50 and 200 liter |
| Form | Liquid |
| Color | clear and coloured |
BOND & BOND
HIGH GLOSSY AND MATT FINISH LACQUERS
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.(2)Apply putty if required (3) Apply first primer thin coat on clean & dry surface (4) Apply second & third coat on first coat (5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
Additional Information:
- Production Capacity: 15000
- Delivery Time: 15 days
- Packaging Details: 50 and 200 liters drum
View Complete details
Highly Flexible Coatings
Product Brochure
BOND & BOND
HIGH GLOSSY AND MATT FINISH LACQUERS
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.(2)Apply putty if required (3) Apply first primer thin coat on clean & dry surface (4) Apply second & third coat on first coat (5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
View Complete details
Urethane- Epoxy Waterproofing Coating
Product Brochure
| Brand | D & BOND |
| Usage/Application | Terrace, wall, in Tank, Swimming pool, Sump, Filter plant, Basement, at Bridge, Buildings, Dam etc. |
| Packaging Size | 5 L |
| Type | Waterproof Coating |
| Coverage Area | 6-8sqm |
| Color | Grey (light and Dark),Blue, Cream, Red, Green, Yellow |
View Complete details
Silicone Water Repellent Chemical
Minimum Order Quantity: 500 Kilogram
Product Brochure
| BOND-01 | BOND-02 | BOND-03 | BOND-04 | BOND-05 | BOND-06 |
Appearance | Clear transparent liquid
| Clear transparent liquid
| Clear transparent liquid
| Clear transparent liquid
| Clear transparent liquid
| Clear transparent liquid
|
Nominal Viscosity at 25°C (cps)
| 10 | 20 | 50 | 100 | 200 | 350 |
Volatile Weight loss for 1hrs. At 150°C (%)
| <6* | <5 | <5
| <2 | <2
| <2
|
0.940 | 0.945 | 0.965 | 0.967 | 0.967 |
| BOND-07 | BOND-08 | BOND-09 | BOND-10 | BOND-12 | BOND-13 |
Appearance | Clear transparent liquid
| Clear transparent liquid
| Clear transparent liquid
| Clear transparent liquid
| Clear transparent liquid
| Clear transparent liquid
|
Nominal Viscosity at 25°C (cps)
| 1000 | 5000
| 10000
| 12500
| 60 k
| 100 k
|
Additional Information:
- Item Code: BOND-07
- Port of Dispatch: Pipavav or Mumbai
- Production Capacity: 10 Tons
- Delivery Time: 15 Days After PO
- Packaging Details: 50 Kg. & 200 Kg.
View Complete details
Paver Tiles Lacquers
Minimum Order Quantity: 500 Kilogram
Product Brochure
| Brand | Mr. Bond Polychem |
Where To Use:-use On Wood, Metal, Terrace, Appliances, Machineries, Wall, Wooden And Rcc Floor, Swimming Pool, Electric & Electronics Instruments, For Paver Block And Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
SOLID % BY VOLUME | 18+-2% | 18 +-2% | 18+-2% | 28+-2% | 28+-2% | 48+-2% |
FLASH POINT | 30 oC | None | 30 oC | 30 oC | 30 oC | 30 oC |
MIXING | Single pack | Single pack | Single pack | Single pack | 3:1 Two pack | 4:1 Twopack |
Additional Information:
- Item Code: LACR-01
- Port of Dispatch: Pipavav or Mumbai
- Production Capacity: 10 Tons
- Delivery Time: 15 Days After PO
- Packaging Details: 50 Kg. & 200 Kg.
View Complete details
Coloured Lacquer Coatings
Minimum Order Quantity: 5 Litre
Product Brochure
| Brand | bond |
High Glossy And Matt Finish Lacquers
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.(2)Apply putty if required (3) Apply first primer thin coat on clean & dry surface (4) Apply second & third coat on first coat (5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
Additional Information:
- Port of Dispatch: Nhavashiva Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
- Packaging Details: 20, 50 AND 200 LITER
View Complete details
High Glossy Coatings
Minimum Order Quantity: 5 Litre
Product Brochure
| Packaging Size | Customized |
| Packaging Type | Customized |
| Brand | Bond |
BOND & BOND
High Glossy And Matt Finish Lacquers
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.(2)Apply putty if required (3) Apply first primer thin coat on clean & dry surface (4) Apply second & third coat on first coat (5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit)
- Port of Dispatch: Nhavashiva, Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
- Packaging Details: 50 and 200 kg
View Complete details
Stone and Tiles Lacquers
Product Brochure
Features:
- Reasonable price
- Highly in demand
- Qualitative
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit)
- Port of Dispatch: Nhavashiva / Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
- Packaging Details: 20, 50 and 200liter
View Complete details
Golden Lacquers
Minimum Order Quantity: 5 Litre
Product Brochure
Bond & Bond
High Glossy And Matt Finish LacquersAcrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.
(2)Apply putty if required
(3) Apply first primer thin coat on clean & dry surface
(4) Apply second & third coat on first coat
(5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit)
- Port of Dispatch: Nhavashiva Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
- Packaging Details: 20, 50 and 200 kg
View Complete details
Lacquers for Glitter
Minimum Order Quantity: 5 Litre
Product Brochure
| Brand | Mr. Bond Polychem |
| Color | Glitter |
BOND & BOND
HIGH GLOSSY AND MATT FINISH LACQUERS
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.
(2)Apply putty if required
(3) Apply first primer thin coat on clean & dry surface
(4) Apply second & third coat on first coat
(5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit)
- Port of Dispatch: Nhavashiva Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
- Packaging Details: 20 liter
View Complete details
NC Lacquers
Minimum Order Quantity: 5 Litre
Product Brochure
| Color | water white |
| Brand | BOND and Mr Bond |
| State/Form | Liquid |
| Packaging Size (ex. 1L or 1Kg) | 20 liter |
BOND & BOND
HIGH GLOSSY AND MATT FINISH LACQUERS
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.
(2)Apply putty if required
(3) Apply first primer thin coat on clean & dry surface
(4) Apply second & third coat on first coat
(5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit)
- Port of Dispatch: Nhavashiva, Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
- Packaging Details: 20 liter
View Complete details
Sublimation Coating Liquid
Product Brochure
| Brand | Bond |
| Packaging Size | 5- 200 L |
| Usage/Application | Glass Wood |
| Form | Liquid |
| Grade Standard | A Grade |
| Country of Origin | Made in India |
BOND
GLOSSY AND MATT SUBLIMATION COATING
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of Stone, metals, cement walls, cement board, RCC& wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
SPECIAL NOTE:- ANTI GRAPHITY AND WATER ,STAIN REPELLENT PROPERTIES WILL PROVIDE ON REQUEST
WHERETOUSE:-Use On wood, metal, Glass, Fiber glass, Ceramic tiles and wash basin, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Stone, Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.(2)Apply base coat Using LACR-01 allow it to air dry for 24 hour. If need fast cure in oven for two our at gradually from 40 oc to 150 oC (3) Transfer print on cured base coat (4) Apply Top coat Using Lacr-01 / LEP-03 / LPU-01on print and cure allow it to air dry for 24 hour. If need fast cure in oven for two our at gradually from 40 oc to 150 oC
View Complete details
Wetting and Despersing Agent
Product Brochure
This series spreader, wetter & penetrators are very effective, efficient agricultural adjuvant which enhances yield of crop by helping effective, crop protection. it can be used on array of crops.
Product Description This spray adjuvant is a super spreading, wetting and penetrating surfactant based on aTrisiloxane ethoxylate. This spray adjuvant helps lower the surface tension of spraysolutions, thereby enhances effective pesticide coverage at lower dosage, lesser wastages.Typically, as a spray adjuvant (@0.05 to 0.1 % dosage) ensures an aqueous surfacetension of 21 dyne / cm. On the other hand, an Octylphenol Ethoxylates containing 10 EO units (acommonly used Nonionic Surfactant) at 1.0 wt % give a surface tension of only 30-35 dynes / cm thus the NP based adjuvant are not effective and efficient as compared to this poducts.This spray adjuvant helps lower the aqueous surface tension more effectively thanconventional spray adjutants.Because this spray adjuvant , a super spreading surfactant , the contact angle of spray solution on leaf surfaces is reduced dramatically , leading to an increase in spray coverage.Additionally, under specific conditions, this products promotes rapid uptake of agro chemicals into plants via stomatal infiltration. Spray solutions taken into plants in this way become rain fast,thereby improving application reliability. This spray adjuvant is nonionic in nature, mak in git useful with a broad range of agro chemical formulations.
Applications1. Super spreader2. Promotes spray volume reduction due to effective spreading and wetting.3. Promoters rapid uptake of agrochemical (Rain Fastness)4. Improves spray coverage5. Nonionic so suitable with majority of formulations.2Usage1. In Agrochemical Formulations2. This spray adjuvant may be used as a component in agrochemical formulations.Although organ silicone surfactants are subject to hydrolysis under acidic or basic conditions, optimum performance is achieved by buffering the formulation to pH 6.5-7.5.Additionally, it is recommended This spray adjuvant be used at a concentration of at least 5%, based on the total formulation.As A Tank Mix Adjuvant This spray adjuvant, when used as a tank-side adjuvant may be used to improve spray coverage, improve uptake or to allow for a reduction in spray volume. This spray adjuvant is most effective as a tank-side adjuvant when spray mixtures are…1. Within a pH range of 5-8.2. Used within 24 hours of preparation.high spray volumes, coupled with high surfactant rates, are not required to achieve sufficient coverage with This spray adjuvant. In fact, This spray adjuvant may provide adequate coverage in may low volume spray applications at rates between 0.025%and 0.1%.Potential Applications This spray adjuvant has been used successfully in spray applications globally. Typical applications include: Application Typical Use Rate (a)Plant Growth Regulators :Herbicide :Insecticide :Fungicide :Fertilizers and Micronutrients :
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit)
- Port of Dispatch: Nhavashiva Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
- Packaging Details: 20,50 and 200 kg
View Complete details
Amino Modified Silicone Fluid
Product Brochure
| Brand | BOND |
non-reactive fluids can be easily converted into micro emulsion by using non-ionic emulsifiers. These emulsions can be used in textiles & leather to generate soft handle, suppleness & silky finish that is capable of with standing repeated washing cycles. They are especially useful for cottons, sarees, suiting, etc to impartsoftness and body to the fabric. Choice of fluid depends on type and degree of softness required and coloration.PRODUCT SELECTION GUIDE non-reactive amino modified silicone fluids that give excellent surface smoothness along with softness and durability. gives the best inner softness and should be used if yellowing is a concern. If yellowing is not of concern (dark fabrics), the best softness is achieved by use of different combination formulation for better modified effects
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit)
- Port of Dispatch: Nhavashiva Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
View Complete details
Metal Foil Coatings
Product Brochure
BOND & BOND
HIGH GLOSSY AND MATT FINISH LACQUERS
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.(2)Apply putty if required (3) Apply first primer thin coat on clean & dry surface (4) Apply second & third coat on first coat (5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
View Complete details
Silicon Defoamer
Minimum Order Quantity: 50 Kilogram
A ANTIFOAM EMULSIONS or DEAFOMER is a chemical additive that reduces and hinders the formation of foam inindustrial process liquids. The terms anti-foam agent and defoamer are often used interchangeably. Commonly used agents are insoluble oils, polydimethylsiloxanes and other silicones. The additive is used to prevent formation of foam or is added to break a foam already formed.
Features:
- Extremely high performance, thus effective at very low concentrations (10-100 ppm)
- Non-Reactive
- Easy to dilute using water
- Compatible with other systems
- Effective over wide temperature ranges
- Contains preservatives to prevent
microbial growth
Application:
- Effluent Treatment
- Detergency
- Paper Industry & fermentation
Industry:
- Latex Manufacturing
- Oil and Natural gas production
- Agrochemical
- Construction (Cement processing)
Defoamers are used in many industrial processes and products: wood pulp, paper, paint, industrial wastewater treatment, food processing, oil drilling, machine toolindustry, oils cutting tools, hydraulics, etc.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit)
- Port of Dispatch: Nhavashiva Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
View Complete details
Glitter Lacquers
Minimum Order Quantity: 5 Litre
Product Brochure
| Brand | Mr. Bond Polychem |
| Color | Glitter |
BOND & BOND
HIGH GLOSSY AND MATT FINISH LACQUERS
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.
(2)Apply putty if required
(3) Apply first primer thin coat on clean & dry surface
(4) Apply second & third coat on first coat
(5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit)
- Port of Dispatch: Nhavashiva Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
- Packaging Details: 20, 50 AND 200 KG
View Complete details
Stone Care Lacquer
Minimum Order Quantity: 5 Litre
Product Brochure
Bond and Bond
High Glossy and Mat Finished Lacquers
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
Where to use:-Use On wood, metal, Terrace, Appliances, Machinery, wall, wooden and RCC floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
Method of use:-
(1) Surface Preparation:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contamination and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.
(2)Apply putty if required
(3) Apply first primer thin coat on clean & dry surface
(4) Apply second & third coat on first coat
(5) Stoving should be done for stoving lacquers.
Bond | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
Type | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
View Complete details
Tin Plate Lacquers
Minimum Order Quantity: 5 Litre
Product Brochure
| Brand | BOND |
| Surface of Application | Metal |
| Application method | Roller |
BOND & BOND
HIGH GLOSSY AND MATT FINISH LACQUERS
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.
(2)Apply putty if required
(3) Apply first primer thin coat on clean & dry surface
(4) Apply second & third coat on first coat
(5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit)
- Port of Dispatch: Nhavashiva Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
- Packaging Details: 20, 50 AND 200 LITER
View Complete details
Surface Lacquers
Product Brochure
BOND & BOND
HIGH GLOSSY AND MATT FINISH LACQUERS
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.
(2)Apply putty if required
(3) Apply first primer thin coat on clean & dry surface
(4) Apply second & third coat on first coat
(5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
View Complete details
Tin Plate Lacquer
Product Brochure
| Brand | bond |
BOND & BOND
HIGH GLOSSY AND MATT FINISH LACQUERS
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.(2)Apply putty if required (3) Apply first primer thin coat on clean & dry surface (4) Apply second & third coat on first coat (5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit)
- Port of Dispatch: Nhavashiva Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
- Packaging Details: 20, 50, 200 liter
View Complete details
Photo Lacquers
Minimum Order Quantity: 5 Piece
Product Brochure
| Brand | BOND and Mr Bond |
| Color | water white |
We are the manufacturer of Photo Lacquers
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit)
- Port of Dispatch: Nhavashiva / Pipavav
- Production Capacity: 10000 kg
- Delivery Time: 15 days
- Packaging Details: 20 liter
View Complete details
PU Lacquers
Product Brochure
Bond & Bond
High Glossy And Matt Finish Lacquers
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.
(2)Apply putty if required
(3) Apply first primer thin coat on clean & dry surface
(4) Apply second & third coat on first coat
(5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
View Complete details
Paver Coating
Product Brochure
BOND & BOND
HIGH GLOSSY AND MATT FINISH LACQUERS
Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.
WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.
METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.(2)Apply putty if required (3) Apply first primer thin coat on clean & dry surface (4) Apply second & third coat on first coat (5) Stoving should be done for stoving lacquers.
BOND | LACR-01 | LACR-02 | LACR-03 | LACNC-04 | LEP-03 | LPU-01 |
TYPE | Acrylic Highly Glossy | Acrylic water Based clear | Acrylic glossy | Nitrocellulose –Acrylic glossy | Glossy Epoxy clear | Polyacrylic polyol (Polyurathane) |
Color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | Water clear & All transparent Dye color | St. yellowish & All transparent Dye color | Water clear & All transparent Dye color |
FINISH | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt | Glossy / Matt |
View Complete details
EXPLORE MORE CATEGORIES